Polaris Discussions about Polaris ATVs.

help a newbie

Thread Tools
 
Search this Thread
 
  #1  
Old 08-23-2006, 10:43 PM
sizmaters's Avatar
Weekend Warrior
Thread Starter
Join Date: Jul 2006
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

im picking up an 03 pred. on sat in pa im in va anything to look for when i get there as far as common problems and such. the guy is letting it go for 2100 and i worry that something is wrong. thanx ahead of time for all your help
 
  #2  
Old 08-24-2006, 02:05 PM
tblazer's Avatar
Pro Rider
Join Date: Aug 2004
Posts: 316
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

All depends on how good the guy maintenanced it. Id look for cracks in the frame, mainly by the gas tank. Also, test drive it and make sure its not missing a gear. And id probly check the wheel bearings by taking ahold of the front tires and see if they wiggle or not. If so, you probly no it has been driven hard and may want to look for another or pay the money to have the balljoints replaced. Just my 2 cents!
 
  #3  
Old 08-24-2006, 02:46 PM
sizmaters's Avatar
Weekend Warrior
Thread Starter
Join Date: Jul 2006
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

thanx any one else?
 
  #4  
Old 08-24-2006, 09:04 PM
magnumLover's Avatar
Range Rover
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

hey t blazer my frount tires do that, also my handlebars more about 1 inch side to side and up and down before moving the tires, any idea how i can fix this?
thanks
 
  #5  
Old 08-24-2006, 09:21 PM
tblazer's Avatar
Pro Rider
Join Date: Aug 2004
Posts: 316
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

What kind of wheeler do you have?
 
  #6  
Old 08-24-2006, 10:34 PM
magnumLover's Avatar
Range Rover
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

2000 polaris magnum 325, bearclaw tires(if it matters)
 
  #7  
Old 08-24-2006, 11:38 PM
tblazer's Avatar
Pro Rider
Join Date: Aug 2004
Posts: 316
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

For your steering post I would check the upper steering post bracket to make sure it's not loose and that the bushings are not worn. Worn bushings is usually what causes it to be loose. Being a 2000, the bearings and roll cup are probably pretty worn so you'de most likely have to replace them to solve the wiggle problem in your wheels. Hope this helps!
 
  #8  
Old 08-24-2006, 11:39 PM
magnumLover's Avatar
Range Rover
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

how do i check the upper steering post
 
  #9  
Old 08-24-2006, 11:50 PM
tblazer's Avatar
Pro Rider
Join Date: Aug 2004
Posts: 316
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

Its just the upper part of the one steering post, but ya you may get by with just taking off the front panel cover but if you still can't get to it you'll have to take off the front plastics as well which should only take a few minutes. If the bracket looks loose to you or the bearings then taking off the gas tank to get at these will make it much easier to work around. You should only have to take out a couple bolts and unhook the gas line and it should slide right out.
 
  #10  
Old 08-25-2006, 12:03 AM
magnumLover's Avatar
Range Rover
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default help a newbie

ok at the bottom there is a bolt that might be loose, this has a pin through it, should i remove the pin and tighten it?
thanks
 


Quick Reply: help a newbie



All times are GMT -5. The time now is 10:02 PM.