on my tb when i move the gear shift it dont work for some reason. it pretty much stays in drive, neatrul and reverse are very very hard to get into. im sure this is a common problem cuz it happend to my other tb. also im removing the swingarm but i cant find the 2 bolts hoding it on. is one under the clutch cover and the other behind the rear brake somewhere ? id like to know before i tear into it. thanks

 

ttt

 

help?

 

i never had any problem putting our t.blazer in any gear unless it was idled to high. all i can see in the break down is 2 bolts holding the swingarm on. just follow the arm up to the end to find where they connect to. sorry dont have mine anymore to look at.

 

killa,

do yourself a favor and spend the money for a service manual~! this way you wont be taking things apart twice and assure yourself of proper assembly.

X

 

x, hit me with your email address.

 

you need two remove your clutch cover and clutches plastic romoval will save on the four letter words. rear brake might need to come off as well depending on the year