i got my carb for $126 from bikebandits.com. mikuni makes the best carbs for that low of a price.your ride is different from mine so it may cost more or less

 

what kind of reed does your carb connect to.does it get bolted on or slide in like my 300's carb

 

Jeez ur lucky, mine is like 180


http://www.bikebandit.com/partsbandi...id~1230923.asp


With that, would i need a bigger airfilter or no? cuz i got a air filter for my stock carb so if i got a new carb do i need a new air filter?


i think i may get a new carb instead of buying the speedometer since i would prob crash when i try and go fast and see how fast im going at the same time lol

 

Mine has no reeds,


And there is like a silver hose clamp you have to tighten after u slide the carb on to the engine

 

thats the reed (i had to ask people what it was) so you can use the same carb as i do. to get the right carb you have to get the jet sizes for the stock carb and get a carb the has jets that are a little biggier.ex if stock is 145 get one that is 165

 

I was told my quad has no reeds,


It just slides on to a circle on the engine...


And right now i have a 185 jet, (not stock) so could i keep it in? cuz it works good with the things i have installed?

 

what size were you looking at. the front is always bigger then the back.ex front can be 40mm and back can be 35mm. measure the front and rear part of the carb. your filter conect a tube that goes from the air box to the carb
so get a carb that has the same size frount as the stock carb. i got a bigger front then my stock carb and had to get a rubber tube from home depo to connect the carb to the tube that goes to the airbox.

 

Ok so if i got that carb


This one


Then even if the front is bigger, (the back has to be the same as stock right?) i just can go to home depot then i can just get a adapter from HD...

 

you can keep that carb but a aftermarket carb has a smoothier flow of fuel and air so it makies more power.i checked on bikebandits for reeds their under fuel and air and they have something to do with carb. the ones i seen look just like whats holding on my carb also the are placed behind the carb. ill ask people so i know for shore.if that jet size works get a aftermarket carb with the same settings.

 

you got it