Trail tech Vapor
#2
Trail tech Vapor
I have the Vapour on mine and the Endurance on the gf's. The Endurance does the job, but the Vapor is really sweet. Easy to read RPM and speed. Pretty much have to be stopped to read ambiant and engine temps. I have set up one light as an overrev light and the other as a over-temp light. Back lighting comes on as soon as the key is turned on. The Mode button cycles through three screens which give you all the info you should ever need. If I didn't have to wait three months to recieve the Vapor I would have bought two of them.
Installation is easy on the Scrambler but the leads for the temperature sensor are a little short; the temperature sensor must go behind the fuel petcock or the leads will not be long enough. This location works but is a little crowded when installing the sensor into the water hose.
The only concern I have with mine is the engine temperature reads " --- " until the engine temperature reaches about 60C.
I will be upgrading the gf's Endurance to a Vapor as soon as I sell the endurance.
Installation is easy on the Scrambler but the leads for the temperature sensor are a little short; the temperature sensor must go behind the fuel petcock or the leads will not be long enough. This location works but is a little crowded when installing the sensor into the water hose.
The only concern I have with mine is the engine temperature reads " --- " until the engine temperature reaches about 60C.
I will be upgrading the gf's Endurance to a Vapor as soon as I sell the endurance.
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
19
11-11-2015 05:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)