I have a 05 sp700. I have a push bar and a wintch on the front, now the front is to soft. I was wondering what the best wey to stiffen up the front is.

 

lawnboy.....

Check here.....This is where I got mine....They worked out great for me.....Get the heavy duty ones......

https://www.erlandsonperformance.com...gory_Code=susp

John

Ut oh......I see you have a lift in the front.....Not sure but call EPI and ask them.....

 

Hey, I have 93 500 HO sportsman with a plow and a winch. I was experiencing the same problem and wound up purchasing the EPI heavy duty springs and they certainly did the trick. Changing them was not a real big deal, just make sure you support the lower A arm so the CV joint does not come apart, because if it does then the job is a pain!

Good luck

Superintendent

 

I replaced mine with the springs from the MV7. Made a world of difference. But as John said, not sure if they would work with the lift.

 

I used the HL Lift Springs on my 06 500ho, gained 2" of lift and now it sits level, and when I lift my plow the front only sags about a 1" to 1 1/2",my plow is very HD with 17" side scoops, ride and handling is alot better to.

 

thanks for the replys I thinkI may try the high lifter springs. I remopved the lift in the front so now it is stock

 

Hey lawnboy....You could also check these out...

http://www.t-m-2.com/

John

 

This is what I did with mine.

EPI Springs

Snow plow

Good luck!!