front center hub won't disengage on sp600
#1
front hub won't disengage
Hi,
I could use a little help diagnosing a problem with my 03 600, here's the symptoms.
I cant turn the AWD off, it stays enageged all the time. ( if I put it up on jacks and spin the rear tires with the ignition off it moves the front tires( if I move the rear tire's slowly it won't move the fronts but it will if I spin them faster) , but will not engage in reverse even with the ignition on and botton pushed) It seems to be a mechanical problem not an electrical one seeing as it behaves the same no matter weather the ignition is on or off.
I think it might of been damaged plowing, any idea's??
-m
I could use a little help diagnosing a problem with my 03 600, here's the symptoms.
I cant turn the AWD off, it stays enageged all the time. ( if I put it up on jacks and spin the rear tires with the ignition off it moves the front tires( if I move the rear tire's slowly it won't move the fronts but it will if I spin them faster) , but will not engage in reverse even with the ignition on and botton pushed) It seems to be a mechanical problem not an electrical one seeing as it behaves the same no matter weather the ignition is on or off.
I think it might of been damaged plowing, any idea's??
-m
#2
#5
front hub won't disengage
Thanks everyone, I'm going to pull the front diff and take a peek at the cage, although I seemed to have reached an impass with the lower ball joint on the front suspension....... that sucker does NOT want to come off.....[img]i/expressions/face-icon-small-mad.gif[/img]
#6
#7
Trending Topics
#8
#9
#10
front hub won't disengage
You can usually hit the swingarm with a hammer in the area where the balljoint goes through. If that dont work then you need a pickle fork. The hammer should work. Its not in that tight.
I would say if its an 03 and you just now broke something then you are doing good.
I would say if its an 03 and you just now broke something then you are doing good.