Polaris Discussions about Polaris ATVs.

'99 trailblazer

Thread Tools
 
Search this Thread
 
  #1  
Old 10-03-2007, 09:40 PM
xljimmy's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2005
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

I just purchased a '99 trailbazer and it is alittle worn out, lol. When searching for parts I keep coming up with gen I.II.III. I am guessing they are a year identified in a surious change or makeover. What are the years they stand for? Is it just trailblazer or is that for all models of polaris atv?
Thanks
 
  #2  
Old 10-03-2007, 11:17 PM
xljimmy's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2005
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

Also someone put scrambler front fenders on it. What else is same on the trailblazer as the scrambler? rear fenders? seat? airbox?
The oil injection is unhooked and there is no oil line. Is that just an ordinary line or something special. Someone said something about it being special so it dont collapes and restrict oil. Anybody know anything on that?
Thanks
 
  #3  
Old 10-04-2007, 12:17 AM
Blacksheep5's Avatar
Pro Rider
Join Date: Sep 2007
Location: FWB
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

the fenders are the same, everything is the same except the drive train you have a gen 3 my 2000 trailblazer is a gen 3 too

i dont know about special line for the oil line, i just used clear fuel line and i have had no problems, just make sure you do not run it with out the oil line hooked up or a pre mix of fuel and oil.

you also have to purge the oil pump if the line has been taken off
 
  #4  
Old 10-04-2007, 12:19 AM
Blacksheep5's Avatar
Pro Rider
Join Date: Sep 2007
Location: FWB
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

also when your looking for body or chassis parts you can use parts from a 3rd gen Scrambler, Sport or Trailblazer

airbox is different then other bikes, you can find alot of parts on ebay
 
  #5  
Old 10-04-2007, 08:54 PM
xljimmy's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2005
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

wow thanks blacksheep5, exactly what I needed to know.
What about engine parts are they same as trailboss 250?
What years is the 3rd gen?
 
  #6  
Old 10-04-2007, 09:11 PM
xljimmy's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2005
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

clutch covers? what are the same models there, lol. Sorry for all the questions. But the more models I can hunt down the more options i can get on ebay. This needs about everything but whole drive setup, steering and shocks. The brakes suck, wheel bearing bad, axle carrier bearings bad, clutch cover duct taped hole, front fenders is ok but not pretty but rear is not ok................................................ ...........

How do you purge the oil pump. When I get it hooked up I figured I would just run it with the premix still untile its super smoking to know its working.
 
  #7  
Old 10-05-2007, 01:35 AM
Blacksheep5's Avatar
Pro Rider
Join Date: Sep 2007
Location: FWB
Posts: 213
Likes: 0
Received 0 Likes on 0 Posts
Default '99 trailblazer

the Polaris 250 2-stroke is the same on all bikes I think

i know that body and chassis parts fit from 96-07

clutch covers should be the same from all years of trailblazer, scrambler and sport and maybe trailboss

I think the trailboss is the same except for body wise

i will have to look in my repair manual for the oil pump purging
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
neo27ny
Polaris
61
05-14-2018 12:19 PM
chewy78
Polaris
1
09-08-2015 10:37 AM
tmboy
Technical and How-To Articles
3
09-01-2015 09:20 AM
suzukiquadrunner1987
Polaris
4
08-06-2015 03:59 PM
shewshew989
General Chat
1
07-14-2015 03:09 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: '99 trailblazer



All times are GMT -5. The time now is 05:29 AM.