what type of grease gun do I use for my polaris
#1
#4
what type of grease gun do I use for my polaris
There are a lot of zerks on the Sawtooth, they are all standard size so any standard grease gun should work. I use both the small Polaris brand and the large automotive one I've had for years. If one doesn't take grease, chances are it needs to be replaced.
#5
what type of grease gun do I use for my polaris
bhilto71,
I own a 99 Xplorer and when I first tried to grease her up, had the same thing happen, the grease would just run down the fitting. The machine was pretty gunked up so after a good cleaning I had the same problem. I was able to get a small into the pressure fitting, it seemed like a bunch just had a hard crust on them. After a couple of pokes, they all took grease.
Good luck
I own a 99 Xplorer and when I first tried to grease her up, had the same thing happen, the grease would just run down the fitting. The machine was pretty gunked up so after a good cleaning I had the same problem. I was able to get a small into the pressure fitting, it seemed like a bunch just had a hard crust on them. After a couple of pokes, they all took grease.
Good luck
#6
#7
Trending Topics
#8
what type of grease gun do I use for my polaris
when i bought my sons used 07 hawkey, none of the fittings would take grease. I took out all the fittings and cleaned around the hole where the zirk fitting is, i sprayed a little pb blaster in there enough to create a "puddle" put the zirk back in and greased with a regular grease gun with synthetic grease, haven't had any problems since. put plenty of grease in to flush out the penetrant though.
Thread
Thread Starter
Forum
Replies
Last Post
ranvette
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
07-04-2015 06:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)