While tightening my chain, I noticed the brackets (welded to the swing arm) that the eccentric locking bolts go through have hair line fractures in the welds. I had problems with tightening the eccentric locking bolts (posted in this forum a while ago) and finally figured that the owner had overtightened them ( supposed to be at 35ft lbs) to where the bolts were bent, and the washers were warped. So in other words, I had to straighten out the brackets ( by hand) and got new grade 8 bolts, nuts, and high strength washers that finally fixed my problem.(A NOTE TO ANYONE WHO MIGHT EVER HAVE THE SAME PROBLEM WHEN TIGHTENING THIER CHAIN!!!!!)
Now I am considering a NEW swing arm that will have 4 bolts to tighten the rear eccentric, instead of the 2 the stock one comes with. ANYONE WITH ANY SUGGESTIONS ON MAKE, COMPANY, ETC. WOULD BE GREATLY APPRECIATED!!!
Thanks!![img]i/expressions/face-icon-small-happy.gif[/img]