So I just want to get an idea of what everyone is running for clutching
Spring color?
Weights?
Helix? or Roller?
Belt?

I myself run HPD plain spring engage around 35 full shiftout 215
10-56 weights 56 grams
44/38 helix
Goodyear powerstreak belt

or sometimes

EPI maroon spring engage 1 full shiftout 170
10-bh weights 47 grams
straight 40 helix
double cog 700 belt

I switch between these 2 because really I have a problem with Commitment....:&gt[img]i/expressions/face-icon-small-wink.gif[/img]
Both are good setups engage low pull pretty good the second one will rev a little higher not too sure which is faster but the first will pull a wheelie easier.

 

I run a Polaris yellow primary spring,10AL(53gram)weights,TEAM roller sec with a 58-44-40 helix and a blk/yellow spring(fairly light for a 4stroke)I am set up for more mid range than lowend but still pulls hard and dont spinout bad on take off.
pulls 6600 rpm like this.Had 10RH weights but rpms climbed to 6770 a little too high for me.
Also ran a Dalton blk/white with 10MBs with Aaen blue sec and It did ok but not as good as what I have now

 

mines all listed in my sig.... although i recently changed to 10-58 weights, and a black and white spring in the team secondary..

X

 

bump