i have a cdi system for a 2007 hawkeye. if anyone has a repair manual for any of the following bikes i need HELP. please write back
2004 scrambler 500 4x4
2004 Sportsman 400
2004 sportsman 500
2005 ATP 500 4x4
2007 Hawkeye 2x4 or 4x4
2007 Scrambler 500 4x4
2008 Scrambler 500 4x4
2005 Scrambler 500 4x4
2006 Scrambler 500 4x4
2005 Sportsman 400
2004-2005-2006-2007-2008 sportsman 6x6
if anyone owns one of these bikes and has a repair manual with the wiring diagram for the cdi system(it is towards the back of the manual under tests) i would greatly appreciate the help

 

I have a service Manual for the 2005-2006 Sportsman 400/450/500
..........Caper..................

 

thanks for answering back. is there any way that you can tell me what color the wires are according to the wiring diagram for the cdi output test?

 

2005 Sportsman 400/500

Pulser Coil
W/R to W = 185 Ohms
W/R to Ground = infinity

Charging Coil
Y to Y = 0.43 Ohms
Y to Ground = infinity

Ignition Coil
Primary = 0.11 Ohms
Secondary = 6.7K Ohms

 

THank you Ujoint. that is helpful because now i know that the cdi system i have works but i do need to know if you can copy a picture of the wire entry view and email it to me or if you can tell me what the wires are (color wise) from top to bottom and left to right from the cdi box. my 2006 repair manual shows one in the back of the book under cdi output test using peak reading adaptor or a voltmeter. i just need to know what the color wires are so that i can rewire my system to match for the best performance of my vehicle

 

sent you a PM