Rear Housing Seal

Reply Subscribe

Thread Tools

Search this Thread

Sep 16, 2008 | 12:45 AM

Malones99

Thread Starter

Weekend Warrior

Joined: Sep 2008

Posts: 2

Likes: 0

Rear Housing Seal

New here! I have a 99 trail blazer 250. replaced the rear housing new bearings seals, everything including a housing. the seal next to the chain sprocket keeps coming out. it's also brand new. any suggestions?

Sep 16, 2008 | 10:53 PM

old polaris tech

Polaris ATV Expert
Retired and loving it!

Joined: Jun 2008

Posts: 24,350

Likes: 44

From: North Texas

Rear Housing Seal

If filling rear carrier with too much grease can pop out seal, plus can loctite around edges of seal and install,but housing must be clean.

Sep 17, 2008 | 11:26 AM

Malones99

Thread Starter

Weekend Warrior

Joined: Sep 2008

Posts: 2

Likes: 0

Rear Housing Seal

so how much grease are you supposed to use when filling the rear carrier?

Sep 17, 2008 | 10:19 PM

old polaris tech

Polaris ATV Expert
Retired and loving it!

Joined: Jun 2008

Posts: 24,350

Likes: 44

From: North Texas

Rear Housing Seal

On a new dry housing I grease the bearings first,then pump in about 8-10 pumps. About every 50 hrs or sooner depending on riding conditions,give it a couple pumps.