Polaris Discussions about Polaris ATVs.

please help

Thread Tools
 
Search this Thread
 
  #1  
Old 10-14-2008, 08:46 PM
k5blaser88's Avatar
Weekend Warrior
Thread Starter
Join Date: Oct 2008
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default please help

i have a 2006 polaris sportsman 500 ho. i cleaned the carb out and now it will start buy i have to give it gas and keep giveing it gas. it doesnt sound like it did befor i cleaned the carb. whenever i let go of the gas it dies and right before it dies it backfires. any ideas what i need to do to get my baby back up and running. thanks

also my master cyclender is leaking is that just a rubber gasket i need to replace
 
  #2  
Old 10-14-2008, 08:49 PM
700 sportsman's Avatar
Pro Rider
Join Date: Jan 2008
Location: NE Ohio
Posts: 1,841
Likes: 0
Received 0 Likes on 0 Posts
Default please help

are the floats set right
and try adjusting the fuel/air screw
 
  #3  
Old 10-14-2008, 09:54 PM
700 sportsman's Avatar
Pro Rider
Join Date: Jan 2008
Location: NE Ohio
Posts: 1,841
Likes: 0
Received 0 Likes on 0 Posts
Default please help

are the floats set right
and try adjusting the fuel/air screw
 
  #4  
Old 10-14-2008, 09:54 PM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Join Date: Jun 2008
Location: North Texas
Posts: 24,352
Likes: 0
Received 34 Likes on 34 Posts
Default please help

Make sure throttle slack about 1/8" slack or can die also! Master cylinder piston and seal kit available,but need installation tool to keep from damaging seal. IF talking about leaking around top bowl as many I've seen do,remove cap,clean corrosion/dried fluid around grooves in top bowl,keep fluid level slightly LOWER than full mark on inside bowl.
 
  #5  
Old 10-14-2008, 11:54 PM
k5blaser88's Avatar
Weekend Warrior
Thread Starter
Join Date: Oct 2008
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default please help

<div class="FTQUOTE"><begin quote>Originally posted by: 700 sportsman

are the floats set right

and try adjusting the fuel/air screw</end quote></div>

if i never messed with the screw do you think i should start now or what. i just pulled the spark plug and its black and wet what does that mean.
 
  #6  
Old 10-15-2008, 12:02 AM
eggenz7's Avatar
Pro Rider
Join Date: Jan 2007
Location: Troup, Tx
Posts: 1,047
Likes: 0
Received 1 Like on 1 Post
Default please help

if the plug is black and wet its running too rich (too much fuel entering cylinder). maybe your airfilter is dirty and not letting enough air through?
 
  #7  
Old 10-15-2008, 12:09 AM
k5blaser88's Avatar
Weekend Warrior
Thread Starter
Join Date: Oct 2008
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default please help

i was let it run with air filter off i ahve to keep it ideld aliitle or it will die.
 

Trending Topics

  #8  
Old 10-15-2008, 07:14 AM
700 sportsman's Avatar
Pro Rider
Join Date: Jan 2008
Location: NE Ohio
Posts: 1,841
Likes: 0
Received 0 Likes on 0 Posts
Default please help

try adjusting the screw that will lean out the fuel mixture, because if the plugs black and wet you have too much fuel
 
  #9  
Old 10-15-2008, 09:01 AM
Kerbbirds's Avatar
Pro Rider
Join Date: Jun 2005
Posts: 2,343
Likes: 0
Received 0 Likes on 0 Posts
Default please help

Sounds like pilot jet has some blockage to me.
 



All times are GMT -5. The time now is 05:31 PM.