stator check
#1
#2
#3
#5
#7
stator check
If you cant get specs from other members,I will look up Tuesday at work,BUT usually trigger coil(white and red/white wires) that plugs in to cdi should be around 97 ohms? plus or minus 20% Cant remember colors on charge coil,either red and red/black OR green,depending on models. Think should be around 440ohms resistance plus or minus 20%. Set meter to ohms and check each pair and check wires to ground,IF any wires shorting to ground,then may have found problem. Also brown is ground on Polaris.
Trending Topics
#9
Thread
Thread Starter
Forum
Replies
Last Post
willday08111217@gmail.com
Technical and How-To Articles
0
08-01-2015 04:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)