front shocks
#2
front shocks
they are really easy...i change my spring in less than one hour. But you have to take off the two bottom nuts on each site to pull the entire shock. The most difficult part was to compress your spring. I did it with two strap binder for compressing the coil....seriously is very easy...
#3
front shocks
Have done it once. Had to remove the front plastics, needed a spring compressor ( have hard of some using a ratchet strap) Support the hub so the CV don't pull apart as it is a bugger to get back together. Remove top hardware loosen cup bolt on bottom. Remove & reinstall. Not real difficult unless you drop the hub.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)