does anyone know what a Coop mod is?
#2
I googled it and came up with this at nyrocatv: Coop 45 mod is just spacing out the primary clutch sheaves to give you better low end. Well worth it. If you go 1mm you don't lose too much top end. If you go the full 2mm and still want the top end, you can do the fixed plate mod to get it back. Both clutch mods are in the tech tips section.
BTW, you don't have to buy a "kit" unless you want everything that comes in it.
It's just small washers to seperate the sheaves. To me it seems like that would be the same as losing the top speed because you have a narrow worn out belt. This is suppossed to be a good thing???
BTW, you don't have to buy a "kit" unless you want everything that comes in it.
It's just small washers to seperate the sheaves. To me it seems like that would be the same as losing the top speed because you have a narrow worn out belt. This is suppossed to be a good thing???
#3
is this info on this forum??? this is alot better than spending 200 on a clutch kit...or is it better 2 just spend the money and get a clutch kit???just dont wanna tear it apart..and than be clueless..
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




