Anyone know if I can put a Moose 60" plow on a Glacier II system?

Thanks!

 

Not exactly sure what you have, or want to do... put the plow on the Glacier plow frame? Anyhow...

If it's the Moose 60" plow and plow frame MADE for the RM3 system you probably can. I contacted them a while back and asked the if the Polaris Glacier II plow and frame would connect up to the RM3 mount, and they said yes.

 

My dealer told me that the Glacier II was a re-badged Moose RM3? I'm sure Polaris doesn't make the plow. One other tip my dealer gave me on the Glacier II plow was to drill a couple of extra mounting holes and to change out the mounting harware to a higher grade. He said that they haven't had any returned for bent mounts since they started doing this. I will check with him next time I'm in the area to find out where the put the extra bolts.

 

Yes the RM2 and G2 blades will swap. I have the G2 and my buddy has a CannedHam with the RM2 and we have swapped blades before

 

An update. I am running the G2 mount plate with the Moose RM3 60" county plow! So far so good. I am just replacing the steel wear bar with a plastic/Ultra High Molecular Weight Polyethylene edge. Hope to use it tomorrow.

 

Pedge1 I would be interested in what you find out, thanks! See if somehow we can get a diagram or even pics
if your dealer has an demo to show, very helpful!

Thx,

R'