Need some tech assistance on a 2000 Scrambler 400 4X4. This is my daughters machine not abused. Noticed the left fromt axle shaft it turning but not the wheel. Are there any common issues with the front hubs and is it hard to repair.

Thanks
Tom

 

Change hub fluids first,if still have problem,you might check that elec connections for this side is ok.If this doesnt help may have to check into hub,especially the black armature plate,bearings and hilliard condition.

 

With the 4x4 on the right pulls and the left doesnt. right?First thing to check would be hub fliud.If fluid level is ok then check for a broken wire going into the strut.If wires are not broken take hub apart and check current at amature.

 

Thanks for the suggestions. Did not know there was hub fluid. Owners Manual states remove set screw and see if there is any hub lub. Is this hub lube a dealer only fluid or is there something else comparable? Thaks Tom

 

You can use type F automatic tranny fluid to get by