Open up the front nose piece look inside you will see a grey/orange stripe wire and a purple one plugged into a black rubber female plug receptical unplug the grey/orange stripe wire Revlimiter is gone and the reverse light works like it should too.
the only thing is you still have to push the yellow button if you want 4x4 mode in reverse.

Just thought I would share the experince with ya all.

Have a good one

 

Hey thanks a lot MilleniumScr500!!!

2000 SCRAMBLER 400 2X4

SCRAMDADDY400

 

I disconnected my rev limiter after I put the clutch kit in mine. It would start cutting off the ignition pulses before the clutch would engage. It's kind of scary how fast this thing will back up now... Unlike a 400ex HA HA

 

Thanks!!!

 

http://forums.atvconnection.com/thre...B=1&Tid=216807

3TV go here and see my update on the RevLimiter if ya want 4x4 too without using the yellow boutton it is very easy just thought you might like to know