i bought an ngk iridium spark plug for my 06 polaris hawkeye 300 AWD. it has the screw on type tip instead of the snap on tip like the stock ones. how should i connect it?

 

if it needed an ngk iridium plug it would have came one from the factory..........save your money and the headache and put the correct plug back in it...

 

Can you just unscrew the tip off the old plug?

 

an iridium plug is and upgrade from the factory plug, 100% designed replacement upgrade. and no, it wont twist off from the factory, i tried and it cracked the white part on the plug, it was an old plug anyways tho. and yes, the iridium plugs do improve performance. i put one in my rancher and it sounded better and ran smoother and revved quicker. i just need the little tip that goes ontop of the threads to make it snapon for the polaris. the hondas fit the threaded tips.

 

I had the exact same problem when I put the iridium in mine. I just went to oreillys auto parts and they found a cap for me for free.

By the way the bike will run better with the iridium. mine did, I don't care what anyone else says about it, whether it should or should not work, but it does.

 

it will unscrew hold the plug were you would put the wrench.then vise grips on the end you need unscrew wala done thay all unscrew.

 

does any one out there ever talk to a new guy that knows alot about 4 2 wheels

 

<div class="FTQUOTE"><begin quote>Originally posted by: Hawkman300

and no, it wont twist off from the factory, i tried and it cracked the white part on the plug,

You are right, not all plugs have the screw-on tip. Might check the part stores or a repair shop. All tips may be the same.( cars,lawn mowers ect.)

 

ya, ill just go to some autoparts stores and see what the have...