I broke both bleaders off the orginal calipers. found replacement off a 2004 330. They bolted right on however I had to put in reducers at the line splitter . i can not get them to pressure up. I have blead them and i "think there is zero air". I even rebuilt the master cylinder. thank you for any help you can give.

 

Take your origional calipers and see if you can remove the old bleeder with an easy out. If you cannot, just drill them out and re-tap the hole for a larger bleeder. You can get new bleeders from napa for a couple dollars. I had to do the same thing on my '92 350L. New larger bleeders dont break off as easy either.

 

Dooger, Thanks however I have easyouts broke off in both of them I forgot to put that in.