Hi, New to the site, really enjoy reading all the posts. I am kinda new to atving always rode dirtbikes and streetbikes but got away from streetbikes because to many idiots on the street. Anyway i have a problem i have a 05 polaris scrambler and the axle bearings are wiped out . I am trying to remove the axle but cant move the sprocket hub. I removed the lock ring on the out side, it moves a little ,it is not seized on, is there another lock ring on the inside . Or is there a better way to remove the axle. Any help would be much appreciated. Thank You

 

If you havn't already sign up over at gen3usa.com and get in touch with scramblerXrated. He should be able to answer your question real quick.

 

Just went through this with my scrambler. Bikebandit.com has a nice breakdown of the axle assembly. Mines an 04 and fought the entire way. I knew it would and had been spraying it with pb blaster for about a week prior. I believe there is only 1 c-clip on either side of the carrier. The rotor assembly is splined and needed a lot of convincing to come off. I cut the axle nuts (about $6 a piece new)