Cold Blooded
#1
#5
check your choke cable..i found when running the machine below say 40 degrees mine wouldnt idle at all..i found the choke cable actually was out of adjustment(too loose)..underneath the left plastic panel the cable has an adjuster,try putting it so theres about an 1/8" of play in it and try it out..just follow the cable down and youll find an adjuster under a rubber boot and just take up the slack. the engine in our machines are the same..let me know if it works,good luck
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)