02 scrambler 4004x4 hub problem

Reply Subscribe

Thread Tools

Search this Thread

09-10-2010, 06:20 PM

itstillruns

Pro Rider

Thread Starter

Join Date: Aug 2005

Location: sussex wi

Posts: 207

Likes: 0

Received 0 Likes on 0 Posts

02 scrambler 4004x4 hub problem

I have a 02 scrambler 400 4x4.one side doesnt lock in 4x4.The other side I can barely pull the armature plate off the hub but bad side I can pull the plate fairly easy. Both sides read same ohms and volts.any ideas? there was metal shavings from the armature plate on bad side.??

Reply Like

09-10-2010, 07:02 PM

ftwflh

Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!

Join Date: Apr 2000

Posts: 6,688

Likes: 0

Received 1 Like on 1 Post

Try plates on opposite sides and see how it acts.

Reply Like

09-10-2010, 08:19 PM

itstillruns

Pro Rider

Thread Starter

Join Date: Aug 2005

Location: sussex wi

Posts: 207

Likes: 0

Received 0 Likes on 0 Posts

I tried the entire hub,cage plate etc on other side,works fine.Is there a tight tolerance on the metal rings that the magnet sits in? I know those can wear on a Sportsman center diff.

Reply Like

09-10-2010, 09:03 PM

ftwflh

Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!

Join Date: Apr 2000

Posts: 6,688

Likes: 0

Received 1 Like on 1 Post

Quote:

Originally Posted by itstillruns

I tried the entire hub,cage plate etc on other side,works fine.Is there a tight tolerance on the metal rings that the magnet sits in? I know those can wear on a Sportsman center diff.

Yes the clearance is very tight.Not sure but .002 sounds about right.Someone may have the exact setting

Reply Like