When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
on the left side of my quad were my belt is. how do i remove that whole thing? theres two wheels that turn wen i go to loosen the bolts on them. is there anyway to lock them so they wont turn?
Just grab the belt in the center and pull up,get the excess slack on top of the rear clutch and roll the belt off the clutch as you are turning it,then just slip belt off the front clutch.OPT
the clutch cover is off. and the two wheels holding the belt is exposed. my problem now is getting the two wheels off to get to the guard behind the wheels.
if your refering to the clutches(wheels) you need a puller for the front clutch and just take the center bolt out of the back clutch and it will slide off.
Of all the things I've lost in life, I think I miss my mind the most!
Join Date: Jan 2009
Location: North East IN.
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Uhmm? Are you trying to remove the clutches(wheels) to get at the back plate(guard?). And if your replacing the belt, removing the clutches is not necessary.