Trail Boss 250 4+4
May 3, 2013 | 08:24 PM
#1
Thread Starter
|
Trailblazer
Joined: Nov 2009
Posts: 27
Likes: 0
Trail Boss 250 4+4
I have a trail boss 250 older model with a model number of W888127. It ran strong for quite awhile then suddenly we don"t have any spark. Does anybody out there have any tips on how to check the mag, with a volt\ ohmn meter?. Thanks Tom!!
May 4, 2013 | 06:59 AM
#2
Polaris ATV Expert
Retired and loving it!
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Check the stator wires leading to the cdi. Black/Red to Brown/White 120 ohms,coil primary tab to ground 0.3 ohms, coil secondary(coil tab to plug wire,cap removed) 6.3k ohms,plug cap range 3700-6300 ohms. Readings are + or - 20%.
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
19
Nov 11, 2015 05:49 AM
craacker
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
6
Sep 9, 2015 04:32 AM
Elkaholic
Land, Trail and Environmental Issues
1
Sep 6, 2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)