Polaris Discussions about Polaris ATVs.

High beam problems

Thread Tools
 
Search this Thread
 
Old Dec 15, 2013 | 12:59 PM
  #1  
megacab07's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2013
Posts: 3
Likes: 0
From: Swea City, Iowa
Default High beam problems

I have a 2002 Sportsman 500 HO and the high beam light doesn't work. I replaced the switch and the bulb and still nothing. The low beams work fine. Any suggestions?
 
Reply
Old Dec 15, 2013 | 04:44 PM
  #2  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

Check the high beam connector plus follow the Yellow and Brown down under the headlight pod to see if you have a short or a faulty ground. This is a bad area as these wires have to bend down from the connector.
 
Reply
Old Dec 15, 2013 | 08:15 PM
  #3  
megacab07's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2013
Posts: 3
Likes: 0
From: Swea City, Iowa
Default high beam problems

I will give those areas a look. Thanks
 
Reply
Old Dec 18, 2013 | 11:22 AM
  #4  
megacab07's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2013
Posts: 3
Likes: 0
From: Swea City, Iowa
Default

Found the problem. It was under the headlight pod-lead wire was broken on one of the loops. Thanks again Old Polaris Tech!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
skinnyr6
Suzuki
7
Aug 25, 2023 02:18 AM
honda71
Honda
4
Jul 12, 2015 05:56 AM
DOC HOLIDAY
Suzuki
5
Jul 9, 2015 01:09 PM
honda71
Other ATV Topics
0
Jul 8, 2015 02:13 AM
MNatv89
Honda
2
Jul 7, 2015 11:36 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:41 AM.