96 scrambler swingarm bolt and nut sizes
#1
96 scrambler swingarm bolt and nut sizes
i am trying to remove my swingarm and have ordered my bushing kit.
however i have a simple question that i cant find out anywhere. what is the size of the inner nut that holds the swingarm (pivot) bolts in place.
the nut has a rounded off outer edge and its really hard to get to and none of my wrenches fit.
however i have a simple question that i cant find out anywhere. what is the size of the inner nut that holds the swingarm (pivot) bolts in place.
the nut has a rounded off outer edge and its really hard to get to and none of my wrenches fit.
#2
Think it was 3/4" (19mm equivalent) If you can't get a wrench on it try a long nosed pair of vice grips and see if you can lock it down to remove. Polaris ATV Swing Arm Shock Nut Lock X2 95 99 7542602 | eBay
#5
Whatever works as they say.. Sounds just like my son. He'll grab a handful of wrenches and which ever one fits,he'll make it work.. P.S. mrtwosroke was right on the sizes,7/8 on the nut,3/4 on the outside bolt head.Hard to remember ever size Polaris bolt especially since the engines are metric and the frames and everything else are SAE..
#7
13/16" sounds familiar on that. just changed a sprocket last week used 3/4".
I wonder if they changed it sometime.
How was the hole in the frame? They can wear when the bolts have come loose.
drive side worse. I machined a sleeve to fit in one of mine.
The other I oversize sized the holes and built new bolts.
I wonder if they changed it sometime.
How was the hole in the frame? They can wear when the bolts have come loose.
drive side worse. I machined a sleeve to fit in one of mine.
The other I oversize sized the holes and built new bolts.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hankey Pankey
Performance Mods and Project Quads
3
05-01-2018 01:33 PM
Hankey Pankey
Performance Mods and Project Quads
0
08-17-2015 05:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)