Engine issues
#3
Check fuel pressure first to make sure it's holding 39 psi.Don't have to crank it,just have the key on when pressure testing.When it dies check that you're getting power to the fuse block and fuses. If it's not check power in and out on the pdm module located at the front of the atv.Has all the circuit breakers, controls, etc. This was a problem area for this and other year models.Also an expensive module if needs to be replaced,but one company rebuilds them for $150 versus around $500 for a new one.https://www.ebay.com/itm/05-06-07-08...JYCRVn&vxp=mtr
#4
Check fuel pressure first to make sure it's holding 39 psi.Don't have to crank it,just have the key on when pressure testing.When it dies check that you're getting power to the fuse block and fuses. If it's not check power in and out on the pdm module located at the front of the atv.Has all the circuit breakers, controls, etc. This was a problem area for this and other year models.Also an expensive module if needs to be replaced,but one company rebuilds them for $150 versus around $500 for a new one.https://www.ebay.com/itm/05-06-07-08...JYCRVn&vxp=mtr
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



