putting clutch back together
#1
When working on the secondary clutch, When you put it back together do you have to give it a 1/4 of a turn, then put it back on, or more or less of a turn? Do you turn it so the spring ir "compressing" (helix turns clockwise), or turn it so it is "expanding" (helix turns counter-clockwise), thanks
john
john
#2
When you line up the notches in the splines you will have to turn the helix or roller housing for a roller clutch in the direction that compresses the spring as you press the helix or roller housing down. This will ensure that the buttons or wheels are on the proper side of the ramp. The clutch will operate if you do it wrong but performance will be affected greatly.
Chris Picciotto
99 Scrambler 500
Chris Picciotto
99 Scrambler 500
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)