next mods??
#1
hey, i am in the market for some new mods, gettin about $300-400 this month to dump n my wheeler, $80 of it is going into some Turf tammer rear tires, possibly Holeshots.. anyways, my thoughts are, bigger front sprocket, 20" tires, or stick with 22"s? maybe a seat cover cause mines ugly, K&N airfilter.. well lets say i have $200 were would you guys put it if you had the mods i already have... they are listed bellow.. peace and thanks
#2
A bigger front sprocket won't do squat if you don't have the power to turn it. My suggestion would be to go all around with new rubber (22's) and wheels, or save for the HPD reed conversion ($800 or so I hear).
As for seat covers check Ebay, I know a guy there has several covers for $20, that fit the TB and SC's.
As for seat covers check Ebay, I know a guy there has several covers for $20, that fit the TB and SC's.
#3
I know you were looking at nerfs (getting rid of those steel floorboards) In the mean time, you could replace the steel units with aluminum ones from the 400 or 500 4x4's. Also the front tube bumper on these machines is aluminum also. Loosing wt is just as good as gaining HP....that is except when it has to come off the "Rootbeer Belly".
Ken Thompson......A guy who never says no to chocolate chip cookies...maybe that was drilled into me by the Seasame Street Cookie Monster.....We were all warped as youth....I need a therapist...hehe
Ken Thompson......A guy who never says no to chocolate chip cookies...maybe that was drilled into me by the Seasame Street Cookie Monster.....We were all warped as youth....I need a therapist...hehe
#4
98trailblazer,,I dropped down to 20"er's on both of my blazer's and I really can't tell a differance on my wifes bike but I can tell a differance on mine.
It seems to make a differance on bottom end but I don't notice any lose on top end,,,not to mention that they look waaayyy better than the stock 22's.
Just mt 2 cents.....
It seems to make a differance on bottom end but I don't notice any lose on top end,,,not to mention that they look waaayyy better than the stock 22's.
Just mt 2 cents.....
#6
I got my fox shock from my local dealer and paid about $170 if I remember right,,,,and yes it made a BIG differance over the stock one...
Have you looked at a set of dominators for your bike ??? they look very similar to hole shots and are a LOT cheaper..
I now wish that I would have gone with them on both of my bikes and as a matter of fact I switched tires with my wifes bike and I now have the dominators on mine and I actully like them better,,,even thought the hole shots and the dominators are both 20"er's the dominators are not as tall as the hole shots and seem to look even better so they are now on my bike...
Have you looked at a set of dominators for your bike ??? they look very similar to hole shots and are a LOT cheaper..
I now wish that I would have gone with them on both of my bikes and as a matter of fact I switched tires with my wifes bike and I now have the dominators on mine and I actully like them better,,,even thought the hole shots and the dominators are both 20"er's the dominators are not as tall as the hole shots and seem to look even better so they are now on my bike...
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
May 15, 2020 08:46 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Sep 23, 2015 06:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



