does anyone have a hpd or aaen 42 mm carb on there 500 scramy i've got one but i bought it from another place trying to save some $ and the jetting i believe is way off if any of you have this would you let me know what jets are in it from a polaris specialty place (hpd, aaens, hotseat) i need to know all the jets pilot main and even the needle the guy had me changing all of it thinking i was too lean but in reallity i was WAY rich if anyone has this info it would be greatly appreciated

 

I have a 42mm carb on my 99 400 but it is a 2 stroke. Probably completely different.

Any way I am rumming a 300 main. My bike is a complete AAEN stage 4 (Big Bore 440)

 

IF IT IS BOGGING ON THE LOW END, SAVE YOUR MONEY AND GET A CARB WITH A ACC. PUMP. I HAVE A 38 TMX FROM AAEN ON A 700 AND IT WILL NOT TUNE OUT. THESE CARBS JUST WILL NOT RUN ON A 4 STROKE.
NEED SOMETHING TO GET SOME GAS IN THE ENGINE WHEN YOU OPEN THE THROTTLE. THE CV CARB OPENS BY VACUMN SO THE ENGINE GETS GOING BEFORE THE SLIDE OPENS ON THE FACTORY CARB.