My 03 SP600 has alot of untapped power if it could just be dumped without winding up. I've heard the heelclicker will cure this. I'm not an expert mechanic but can follow directions. How long does this install take for the average joe? Should I bring it in for the install? Is there tuning and re-tuning or just a install given the instructions. Thanks in advance.

John

 

I installed on on my 700 and it took about 1.5 hours. I had a little filing to do, so if you don't need to do that, probably less than 1 hour. I did have the dealer install the spider shim, as it takes special tools. Other than that, it's a snap. I used the recomended setup for the weights, and it works awesome. No belt slipping, andit reallt put the power to the ground. [img]i/expressions/face-icon-small-smile.gif[/img]