Well i ordered my 13 tooth front sprocket..should be in this week..but since i went with a 22' rear tire, i decided to change the rear one to 38 tooth. A little more low end grunt. ANyways..how do you change the rear? I mean is it just a matter of taking the wheel off..loosing the chain, then unbolting the sprocket? You dont have to do anything to the axle or hub do you??

 

You have it right Scott, that's all you do.

 

Thanks! Hopefully it will be pretty straight forward! My only concern is that im gonna have it geared too low.. but if my stang can handle the low gears..my bike can too! [img]i/expressions/face-icon-small-wink.gif[/img] lol

 

You are going to have to remove the hub to get the stock sprocket off. No big deal though. only takes 5 or 10 minutes to change them out.

 

How does the hub come off? Remove the end cap and just unbolt it? i've never done this before..

 

Removethe cap, remove the carter key, then unbolt it. no problem.