Ihave a 2002 trailblazer.... need to know if the scram. bolt holes on the pull start... are spaced the same on the scram.. and the trailblazer... or can someone measure the bolt hole on the scram for me.... i want to put a torque plate on just for the reason to keep the belt in line in my T.B......... i know i just have a stage 1 kit but i want no engine movement when i throttle it..... thanks in advance..... if someone who owns a scram and a trailblazer great please measure..... if someone just owns a scram please measure thank you[img]i/expressions/face-icon-small-happy.gif[/img]

 

if someone reads this look at the post marked ( just asked one simple thing

 

The pull start housings are totally different. The torque plate
will not fit a Trailblazer. I made my own but because my TB is
down for new crank bearings I have not had a chance to test it!

 

talonhawk,

[img]i/expressions/face-icon-small-sad.gif[/img], me too. Even worse, I have a hole in my piston.

 

Sorry to hear about the piston! My biggest problem was to
remove the bearing from the mag side of the crank. The Dealer
wanted $60 to just pull the bearing off. I said NO!!!WAY!!!
I did it myself with a little help from a local Saturn car dealership!