Anyone know the piston to wall clearance on this Quad?
Thanks

 

I just recently checked this for my 89 LT250R. The numbers in my Clymer manual were clearly a mis-print. If I recall correctly the numbers for the 85 - 86 seemed reasonable 1.5 - 3 1000ths. The numbers for my 1986 Honda 250R were also in that range. I just received a factory fresh stock barrel and a Std. size Wisco piston (for the 89 LT250R). When I measured the side clearance it was 2 - 2.5 1000ths.

Hope This helps,
Dave