i was reading the latest issue of dirtwheels about the duncan powered kfx400 racer. and i noticed that in the pictures that the choke lever is gone!!! where did it go? the article didn't say anthing about it. if anybody knows how to do this please let me know. i'd like to keep the choke but if i could relocate it somewere else that would be great

 

My thoughts exactly! I saw that same issue and wondering the same thing. On my Z I noticed that the whole choke/starter *** was loose and discovered a bolt to be missing, and when I tried to replace it the hole seems to be stripped out. When I saw that article I was hoping something would come out telling how they did that. If you find out anything e-mail me at durabluz400@yahoo.com and let me know!
Thanks!

 

I believe that Duncan quad runs a FCR carb so therefore you can't use the stock choke setup. Another option would be to convert to the DRZ dirtbike choke setup which is just a pull **** mounted on the stock carb. A few people out there have done it. Pretty cheaply to.

 

Actually - Edelbrock Carbs is a main sponsor of the DRI racing team, so guess which carb they use... Edelbrock Carbs - You guessed it... The Choke is connected to the carb. Check out the Aug. 03 ATVaction mag... it has a breakdown/interview of Brad Pages GNCC DRI-Z400 w/ Edelbrock Carb.

- STILFX