I bought a buyang 110 kids 4 wheeler that didn't run a while back, I put a starter on it and got it running but the carb needed cleaned. I cleaned the carb and noticed the float was full of fuel but I put the float back in the way it was anyways. It seemed to run ok and would idle about as long as you wanted it to but it didn't like much throttle, so I cleaned the carb again and drained the float, set it right, and sealed it with tank sealer/liner. It isn't filling with fuel now but now it won't idle at all choke or not and barely runs with a lot of throttle and choke. Could my float fix have ruined something? The needle for the float is seating and the carb isn't leaking but I can't figure out what the problem is. Any help is appreciated thanks.