aftermarket cv joints of 03 eiger
Apr 11, 2004 | 05:06 PM
#2
Trailblazer
Joined: May 2003
Posts: 75
Likes: 0
aftermarket cv joints of 03 eiger
Hey
what's the reason that you are looking for aftermarket cv joints? Did you break yours, that happened to me. w/b if you ever found any. Also, I have a question about CV joints if you know. Inside the wheel where the outer CV joints is located there is a bearing that goes around the joint. Do you know if I can just replace the bearing rather than spending $300 on the entire part? Thanks a lot!
Josh
what's the reason that you are looking for aftermarket cv joints? Did you break yours, that happened to me. w/b if you ever found any. Also, I have a question about CV joints if you know. Inside the wheel where the outer CV joints is located there is a bearing that goes around the joint. Do you know if I can just replace the bearing rather than spending $300 on the entire part? Thanks a lot!
Josh
Apr 11, 2004 | 10:14 PM
#3
Pro Rider
Can't wait to feel that 130 HP at the dunes.
Can't wait to feel that 130 HP at the dunes.
Joined: Nov 2003
Posts: 872
Likes: 4
From: Arlington WA.
aftermarket cv joints of 03 eiger
I bought heavy duty CV's for my Vinson from Rockford Constant Veloscity. You could try them at 1-800-728-7237. Sean is the guy that dose ATV's his extention is 307. The heavy duty one are a lot bigger that stock ones.
The part # for the Vinson is D2015/182RT might be the same for the Eiger.
You can look at a microfise for that bearing at www.ronnies.com.
The part # for the Vinson is D2015/182RT might be the same for the Eiger.
You can look at a microfise for that bearing at www.ronnies.com.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
