suzuki vinson rev limiter
#11
suzuki vinson rev limiter
I raced my buddies 04 Griz with my Vinson. He has 27" tires, I have 26".
Starting in second gear, I get the jump on him, and can rev it out pretty high before I have to shift, but he can catch up and pull away from me every time...that extra 160cc's makes the difference
Starting in second gear, I get the jump on him, and can rev it out pretty high before I have to shift, but he can catch up and pull away from me every time...that extra 160cc's makes the difference
#12
#13
suzuki vinson rev limiter
If you have to choose between the vinson or the foreman,buy the vinson it is a better atv.I have a 2006 vinson 500 auto and love it.I used to have a 450 foreman and to be honest,the vinson will eat it for lunch.And the new body style looks good.Just add a jet kit,air filter,pipe,and a clutch kit and you are ready to tear up some trails.
#14
suzuki vinson rev limiter
Reverse Rev still current as above for a 2004 model?
"All of the wiring involved is over the left rear wheel.
Cut the blue/red wire to the CDI module. Tape the end to the CDI module. Connect the other blue/red end to the striped end of a diode. Connect the non-striped end of the diode to the white/red wire.
I used a 1N4001 diode for a total cost of $0.30. you can get one at radio shack."
"All of the wiring involved is over the left rear wheel.
Cut the blue/red wire to the CDI module. Tape the end to the CDI module. Connect the other blue/red end to the striped end of a diode. Connect the non-striped end of the diode to the white/red wire.
I used a 1N4001 diode for a total cost of $0.30. you can get one at radio shack."
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
09-01-2015 11:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)