how hard is it to replace the boots on the front my bottom right side is torn

 

I just replaced mine a few months ago. It wasn't hard getting the shaft off. The hardest thing to do is get the new clamps tight on the new boot. One of those pair of pliers designed for CV clamps would have been nice.
Just pay attention to how the joint comes apart. You can put it together wrong and not know it. I put mine together wrong and didn't realize it until I was all done. I had to cut the new clamps off and take it apart to do it right. Paid a few bucks for new clamps and all was well. No problems since I replaced the boot.

 

Any transmission shop can put those bands on for a very small fee. Or atleast they should be able to.

 

Check out the post I just did for cv boot replacement. I think you'll find it useful.[img]i/expressions/face-icon-small-smile.gif[/img]

 

hey dan this is kyle K.....

we had talked several mounths back about custom telecopeing CV joints that we were going to prototype. i got busy and never got back to you.... would you be still interested in doing this? i have my axles still as spares, and once again i cant ride my bike due to breakin the frount diff case....right after i broke the frame....and got it all done up nice.

post back and i will give you a call and we can talk i would still like to send you my axles.

kyle

 

Hi Kyle,
Oh Yeah! Yes, I'm always looking for something to work with. You can call me at 1-800-338-2326 M-Sat. 8-6 e.s.t. I may be going Watkins Glenn (Nascar races) this weekend are you anywhere near there? And no, I'm not a redneck I just have a friend that hooked me up. [img]i/expressions/face-icon-small-wink.gif[/img]