How much does one of those cost? and is it compatible with my thumb throttle?

 

Yes, and I think I got mine for around $130 or less. Will notice an improvement over stock immediately, and will really wake it up with an aftermarket exhaust.

 

thanks bashr. where do i find one at? if you got a link that would help big time.

 

Heres where I got mine. Best price i could find. I think it was a few bucks cheaper when I bought it, but still not bad. I heard you can get a 30mm round slide off bike bandit for liek $30, but I have no experience with them as far as fit or capability. This one fits on the stock manifold and air pipe.

Mikuni VM28-418 SQ/SLD CARB CMPLT VM28-418

 

Hi Guys, just wanted to say hi. I just purchased a 87 230LTS. Plan to restore it. Needs a rear brake caliper and I believe a new clutch plates. It runs but pops and races. I cleaned the carb and it still pops and races. I think the valves are either burned or out of adjustment. I decided to strip it down and replace all the bearings and go through the motor. If anyone has a rear brake caliper let me know. Thanks!

 

HI welcome to the forums. I usaully have extra parts but i have been bought out. you can almost certainly find one on ebay.

 

Hey Thanks, I am also in need of some new tires if anyone has them. Question about the brake caliper? Do I have to find a 87 model? Or will other years work?

 

i think 87 - 88 will fit yours. i am not too sure if any other years will fit. Rockymoutainatv.com is a great place to get tires. swing over by my profile and you can get a good look at what i got from there. i got the wheel and tire combo for $228 with free shipping.

 

228.00 is that for two rears and rims?

 

Yeah $228 for rear tires and rims. My front tires and rims were, i think, $196.