The moderators check pix first, sometimes takes a day. Thanks for your help.

 

looks awesome! Must be a fun ride!!!!

 

1987 lt250r a arms===outer most part of top a arms from cap over bushing outside to the other cap on the outermost other side is approx. 9 3/4 in on bottom and 10 1/4 uppers.length From the center of the bearings to the center of the balljoint 12 5/8 on bottoms and 11 on uppers good luck...oh and width of all a arms where the go in mounts on frame are like 2 inches. had to go get my extra frame and a arms out of pole barn sorry took so long.

 

Thanx you guys for posting, as soon as I get off from work I will be taking some measurements w/ fingers crossed.