Only Suzuki makes the service manuals. I don't know why Clymer doesn't, but they don't. You can look on eBay for a service manual, but most likely youl'l have to shell out $50 for a new one. [img]i/expressions/face-icon-small-shocked.gif[/img]

 

If you need swing arm bearings Pivot Works sell them for about $50.oo compared to Suzuki at around $230.oo.
AND GREASE THE CRAP OUT OF YOUR SWING ARM BOLT THAT GOES THROUGH YOUR ENGINE CASE SO IT WILL NOT GET STUCK!!!!!!!![img]i/expressions/face-icon-small-mad.gif[/img][img]i/expressions/face-icon-small-disgusted.gif[/img][img]i/expressions/face-icon-small-mad.gif[/img]

If you need to look up parts , I use East Coast ATV, The have the parts break down . I also helps to put back to together when you you have an extra bolt ......[img]i/expressions/face-icon-small-blush.gif[/img]

Good Luck with your Zilla[img]i/expressions/face-icon-small-cool.gif[/img]

Mike

 

Stay away from Sidewinder. My cousin paid through the nose for the whole works( I think it was $380, I'll find out for sure). It lasted two rides(literally). Big to-do and basically a loss of money for him. He runs D.I.D. stuff that lasts forever on the same bike. His name is Walexa in this forum. Look at his pics and you'll opt for the el-cheapo brands. I, like Duneaddict, run several different gearings on mine. I have a 15 tooth for the front, but I'm scared to use it without the casesaver. Anybody run 15 up front?