I am asking this for my father inlaw.He bought this 4-wheeler for his son we knew it wasnt getting spark when we bought it and it has turned into a nightmare up to now we have put a new cdi,coil,spark plug,wiring harness,checked the key switch off/run switch.Icant remember what the magnetic thing was called its by the fly wheel I call it that is new.any way he and I have gone over everything a thousand times cant figure it out dumped alot of money in it hope someone can help.thanks

 

Welcome

Is it a moto 4 i still have myne it was my 1st bike

So what is actuly wrong.

 

But that doesnt help me get spark.Got anything else?

 

Didnt see your ? It will not spark we tested everthing we could with a multi meter everything checked out if it didnt we replaced it.Dont know were to go from here.

 

Is the magneto producing current. What about the magneto?

 

Fuse? its under the seat. i blow them alot

 

We replaced the fuse,The magneto Which goes to the pick up coil I think that was not prducing aLOT of voltage but we replaced the pick up coil so could the magneto be bad?

 

The magneto itself is original.

 

That magnetos/stator been spinning in that bike for 25 years... Most defiantly that could be it .

Im not sure how to test them or how much current the stator on that bike puts out but its something you might want to look into , if everything electricals new thats the only thing it could be, or did you replace the stator/magneto already?

I dont know much about the specific model but all engine setups tend to work alike.

I hope thats what it is. Good luck...