Utility ATVs Discussions on utility ATVs.

Help with wiring problem 04 grizzly

Thread Tools
 
Search this Thread
 
Old Mar 6, 2004 | 11:41 PM
  #1  
Bjack's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2004
Posts: 2
Likes: 0
Default Help with wiring problem 04 grizzly

I recently had to remove the front end plastic to inspect the radiator. I was very careful to check the wires and the plugs and thought that all wires were the same color on both sides of the plugs, well upon assembly I am down to 4 plugs that don’t have matching wires.
One is a 2 prong that comes off the same harness as the switch plug, it’s color is 1 pink with 2 gray dots and a black with 2 gray dots and the connector is white female. I think this is the power wire for the accessories plug on the fender but that wire off the fender is white with black stripe and the other wire is green.

Then we have a wire that comes from the left brake handle both wires are black and the connector is white male.

Same from the right brake lever except the plug is black male.

There is a 2 prong that is also coming from the switch harness that has a yellow wire with a gray spot and a brownish wire with a gray spot the connector is black female.

The last wire is a 2 prong black wire gray spot and a black wire yellow strip gray spot connector is white female
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ragtop
Honda
1
Jun 27, 2015 03:04 AM
FWhitt
Chinese Quads
2
Jun 13, 2015 02:22 PM
wildbill59
Yamaha
3
Jun 9, 2015 02:28 AM
elpayaso
Chinese Quads
4
Jun 3, 2015 10:39 AM
elpayaso
Other ATV Topics
0
May 30, 2015 05:43 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:00 AM.