Old PSAR thread - please see the new one
Originally posted by: hondablue
Just got back from pacific race ways...what a blast...
michael 1st both motos by a large margin...
Nicole 4th and 2nd for a 2nd overall...
Me 2nd on both motos racing vet c...
Good times there
Just got back from pacific race ways...what a blast...
michael 1st both motos by a large margin...
Nicole 4th and 2nd for a 2nd overall...
Me 2nd on both motos racing vet c...
Good times there
Originally posted by: RealtorRider
there are valve ajustments that really mean adjusting the Valves, and the there are the expensive ones that add horsepower and displacement
Originally posted by: WildTurkey151
Are you talking about drinking in the garage and acting like we are working on the quad.
Originally posted by: RealtorRider
BE CAREFUL ON WHAT KIND OF VALVE JOB THEIR TALKING ABOUT!!!!! [img]i/expressions/face-icon-small-shocked.gif[/img]
Originally posted by: WildTurkey151What kind of work is involved in a valve job?? I have never done it and I don't know if the shop did it but how do I know when I should do one or how serious it will have to be before I have to do one.
Originally posted by: Red400EXRod
Great job! What's Michael riding?
Originally posted by: hondablue
Just got back from pacific race ways...what a blast...
michael 1st both motos by a large margin...
Nicole 4th and 2nd for a 2nd overall...
Me 2nd on both motos racing vet c...
Good times there
Just got back from pacific race ways...what a blast...
michael 1st both motos by a large margin...
Nicole 4th and 2nd for a 2nd overall...
Me 2nd on both motos racing vet c...
Good times there
Originally posted by: WildTurkey151 What kind of work is involved in a valve job?? I have never done it and I don't know if the shop did it but how do I know when I should do one or how serious it will have to be before I have to do one.
Front plastic , tank, intake and exhaust covers off
Check the clearance with a feeler gauge
They're either gonna be tight, loose or just right
Motion Pro sells the feeler gauges and a nifty little Tappet Socket Set that makes the job alot easier
The shops probably check the intake and if they're close, they may not adjust them, the exhaust are almost always within tolerance
Originally posted by: Red400EXRod BigD, Larry or Bing can help you with adjusting the valves on a Rappy!
Originally posted by: Red400EXRod No, just minor mods![img]i/expressions/face-icon-small-wink.gif[/img]
Originally posted by: Red400EXRod
Bing, when I had Montazuma's revenge I lost 15 pounds in 3 days. All from dehydration.
You really should be checked out by a doc. Vital organs shut down quickly when dehydrated.
Bing, when I had Montazuma's revenge I lost 15 pounds in 3 days. All from dehydration.
You really should be checked out by a doc. Vital organs shut down quickly when dehydrated.
still cant hold anything down,,,,maybe 10 oz in the last 20 hours
trying to bring the temperature down 1st,,,,101.5
might be rolling to the doc tonight,,,,if i dont normalize
i;ll bet i have already dropped 20lbs,,,,,,,havent felt this chitty since i was a kid
Originally posted by: maggiesboy
pedalite kiddie beverage, it will put the goodstuff in ya. If you can keep it down for as little as 5 minutes, you will begin to feel better.
Originally posted by: Bing
anyone have any good suggestions for food poisoning? Been spraying out both ends for 12 hours,,,,,,and I am very dehydrated now,,,,and cant hold down water.
I repeat,,,food poisoning,,,,no alcohol at all in the last 48 hours.
gonna get an intravenus needle if it goes much longer
anyone have any good suggestions for food poisoning? Been spraying out both ends for 12 hours,,,,,,and I am very dehydrated now,,,,and cant hold down water.
I repeat,,,food poisoning,,,,no alcohol at all in the last 48 hours.
gonna get an intravenus needle if it goes much longer
pedialite is what the pharmacy recommended






