Well, Bear and I had a great ride today. [img]i/expressions/face-icon-small-smile.gif[/img] Rode around in circles, squares and all kinds of other shapes as some of the trails were blocked by downed trees, washouts and such. Quite a few places the Scotch Broom was hanging to the ground over the trail which was kind of interesting. Bear and his quad would disappear into a pile of brush and I would creep ahead being careful to not run into him. Weird. Only spot we had a problem was a washout at the top of a steep spot. Bears AC started to come over backwards so he had to winch himself over the worst of it. Then he hooked a strap to the front of my mighty 360, I couldn't get off the handlebars or it would have gone over, and I was able to push him up the rest of the hill. [img]i/expressions/face-icon-small-wink.gif[/img] [img]i/expressions/face-icon-small-happy.gif[/img]

Contrary to what you may read elsewhere, mondays don't suck. Just ask Bear. RETIRED [img]i/expressions/face-icon-small-smile.gif[/img]

 

If I missed a reply on this, sorry.

Banjo Bolt is a bolt that is hollow for most of its length and cross drilled near the head. Purpose is to allow a fluid to travel through the bolt and the cross drill holes. When inserted thru a Banjo Fitting, a thick washer like device with a provision on the side to allow attaching a hose or tube and having internal passages as needed, it will allow a fluid to enter or exit the device to which the assembly is attached.

Does that make sense?

ORRR, it's the bolt used to hook a banjo to that which it needs attaching to. [img]i/expressions/face-icon-small-smile.gif[/img]

 

Evening PSAR! Nothing like a late night at werk!

 

Read this and the rest of your posts on this OF. If you get to Comex there is a little butcher shop on the north end of town, east side of the old hiway, that has the absolute best sausage to be found.

Good luck with the new pup, that is one long drive. When fishing was good up there we used to spend a couple of weeks each year just north of Comex.

I like Bing's idea of a float plane ride. [img]i/expressions/face-icon-small-smile.gif[/img]

 

You can have whatever you want, it's on me and I promise I won't tell your SWMBO , mine doesn't care. But I will never rat you out, well maybe if she paid me a dollar, but not for less![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img][/quote]

Ha! I find the offer of free food after the ride! And as far as ratting me out I'll bet you would give a dollar for the chance. [img]i/expressions/face-icon-small-happy.gif[/img]

I enjoyed meeting your SWMBO today. Did you notice I refrained from mentioning she could have done a lot better? And what was the deal with the waitresses coming over and practically sitting in your lap? [img]i/expressions/face-icon-small-shocked.gif[/img]

Need to plan another ride for next week. You get to buy breakfast, I'm having steak.

 

HB,

I'm sorry that you have to go through that. It's tough and there's nothing I can say but hang in there, you have friends here and we're here for ya. We've enjoyed your friendship as well, but don't think it ends because we're friends with both of you. We expect you to come ride with us in the future!

 

Good choice of words 2mmny! If you need anything HB let us know!!! That goes for you too nwcutie!

 

Once he throws a leg over a Raptor, he'll never ride a Honda again [img]i/expressions/face-icon-small-wink.gif[/img]

 

I got Weeman's new rear trike fenders and Cylinder head ordered today [img]i/expressions/face-icon-small-happy.gif[/img] It's getting closer [img]i/expressions/face-icon-small-happy.gif[/img]

I need to find a local machinist to put a fly cut on my head and cylinder for the 250. The guy in Auburn wants $70.00 [img]i/expressions/face-icon-small-shocked.gif[/img]

 

Quality Outboard & Boring in Mukilteo [img]i/expressions/face-icon-small-smile.gif[/img] tell them Bobby sent ya [img]i/expressions/face-icon-small-smile.gif[/img]