<div class="FTQUOTE"><begin quote>Originally posted by: tencubed
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>
About the same temp as Rod's ball - bearings I would guess.</end quote></div>

I was just wondering if it was the same temperature to where it would freeze the ***** off a brass monkey???

 

<div class="FTQUOTE"><begin quote>Originally posted by: maggiesboy
<div class="FTQUOTE"><begin quote>Originally posted by: Red400EXRod
I plan in leaving the bearings in the freezer until tomorrow.
So what temp? 250 or 375?</end quote></div>
in my opinion, if you use 375, put the part in as soon as you turn the oven on.
The lesser temp, preheat then install.
half dozen of one, 6 of the other. I don't have welding gloves, so I use the cooler temp</end quote></div>

I was guessing around 250-275. Randy was pulling my leg about the 375![img]i/expressions/face-icon-small-tongue.gif[/img]
I washed it in the dish washer (the bearing carrier) and it was pretty hot after the hi temp rinse! (Don't tell Cindy I washed it there!)
I just hope I don't need to really pound them to get them seated.

 

<div class="FTQUOTE"><begin quote>Originally posted by: tencubed
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>
About the same temp as Rod's ball - bearings I would guess.</end quote></div>
I'll have to see if I can find a thermometer to put in the freezer to get an accurate reading!

 

<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: tencubed
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>
About the same temp as Rod's ball - bearings I would guess.</end quote></div>
I was just wondering if it was the same temperature to where it would freeze the ***** off a brass monkey???</end quote></div>

Now, are witches **** in brass bras colder than just plain witches ****? And would that temperature be higher or lower than that needed to freeze said ***** off of a brass monkey?

 

<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz

<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>

I was just thinking more about your question. Can it be a prime number?

 

<div class="FTQUOTE"><begin quote>Originally posted by: Red400EXRod
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: tencubed
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>
About the same temp as Rod's ball - bearings I would guess.</end quote></div>
I was just wondering if it was the same temperature to where it would freeze the ***** off a brass monkey???</end quote></div>
Now, are witches **** in brass bras colder than just plain witches ****? And would that temperature be higher or lower than that needed to freeze said ***** off of a brass monkey?</end quote></div>

Now I can say that I haven't seen a brass bra, a witches tit (ok maybe I have), or a brass monkey. But when you think of the coeficient of expansion of brass, when it get's cold, it squeezes the base of the ***** and they fall off. What happens to the witches tit???

 

<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Red400EXRod
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: tencubed
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>
About the same temp as Rod's ball - bearings I would guess.</end quote></div>
I was just wondering if it was the same temperature to where it would freeze the ***** off a brass monkey???</end quote></div>
Now, are witches **** in brass bras colder than just plain witches ****? And would that temperature be higher or lower than that needed to freeze said ***** off of a brass monkey?</end quote></div>
Now I can say that I haven't seen a brass bra, a witches tit (ok maybe I have), or a brass monkey. But when you think of the coeficient of expansion of brass, when it get's cold, it squeezes the base of the ***** and they fall off. What happens to the witches tit???</end quote></div>

I'm thinking a brass bra has a far lower R factor than a fabric bra, thus a brass bra would more readily transmit the ambient air temperature than a fabric bra. Logical thinking then would conclude that a witches tit would in fact, be colder in a brass bra.
Along the same thought lines is, does a witch wear a bra if it is not made of brass?
Therefore would the lack of a bra altogether incur a higher or lower temperature in a witches tit than one in a brass bra?

 

I wonder of we could get a federal grant to study this further?

 

GN and sweet dreams PSAR!

 

<div class="FTQUOTE"><begin quote>Originally posted by: Red400EXRod
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Red400EXRod
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: tencubed
<div class="FTQUOTE"><begin quote>Originally posted by: 2mnyToyz
<div class="FTQUOTE"><begin quote>Originally posted by: Dirtmomma
BURRRRRRRRRRR it's colder than a witches tit out there this morning...</end quote></div>
Exactly how cold is a witches tit? Just need a round number...</end quote></div>
About the same temp as Rod's ball - bearings I would guess.</end quote></div>
I was just wondering if it was the same temperature to where it would freeze the ***** off a brass monkey???</end quote></div>
Now, are witches **** in brass bras colder than just plain witches ****? And would that temperature be higher or lower than that needed to freeze said ***** off of a brass monkey?</end quote></div>
Now I can say that I haven't seen a brass bra, a witches tit (ok maybe I have), or a brass monkey. But when you think of the coeficient of expansion of brass, when it get's cold, it squeezes the base of the ***** and they fall off. What happens to the witches tit???</end quote></div>
I'm thinking a brass bra has a far lower R factor than a fabric bra, thus a brass bra would more readily transmit the ambient air temperature than a fabric bra. Logical thinking then would conclude that a witches tit would in fact, be colder in a brass bra.

Along the same thought lines is, does a witch wear a bra if it is not made of brass?

Therefore would the lack of a bra altogether incur a higher or lower temperature in a witches tit than one in a brass bra?</end quote></div>

what shape is the brass bra? Pointy?