Is this pipe any good. i like the looks and the weight of it but does it produce as much as the rest in power. so should i buy this pipe or the yoshi. i like the yoshi to which one do you recomend as being the better pipe for track and trail hill climbs and sand pits.

 

come on guys some one has to know something about the pro circut pipes

 

i have a pro circiut pipe on my 250ex, it sounds great and gives alot of bottom and mid power. it should do the same for the raptor.




============
01 250ex
pc full system
DG alloy nerfs(reinforced)
DG alloy bumper
k&N air filter,pre filter, lid removed
20in razrs

 

I have the pro-circuit slip on and K&N power kit. I can say that it does have more bottom and mid than stock. I'm not sure about the top end though. I usually race up hills and can say that I can pull on most full exhaust raptors, but I think jetting also plays in the role too. It definitely adds more torque bottom to mid. I think I need to open the airbox and/or get a headpipe to see an improvement to top end.

 

I have a PC T-4 on my Warrior and I like it. On My Shee I have Toomey T-5s... The PC is a good four stroke exhaust. You will not be disappointed.

Hub

 

I installed a Pro Circuit on two raptors. They are both very fast, and sound awsome. A ton of torque

 

I installed the Pro Circuit head pipe on a 2002 Raptor and the White Brothers E series silencer. The fit of the pro circuit head pipe is great and I could really the difference in power. I think I have 13 discs in the E series exhaust if my memory serves me. If I had the bucks, I would get the Yoshi titanium header and silencer. Doubt there is substantial difference in performance but it is half the weight of a steel system.

 

i just orderd the pro circut silencer last night from rocky mountain i also orderd the pro design shifter and park brake block off. did i do good.